Description
About this item
- Jumbo size 20×4.5 bag filter assembly , Economical Range
- Standard 1 inches inlet outlet is shipped in the package , If pipe Size is Less or more , One can purchase Reducers from any local hardware store , Seller does not ship Fittings along the product.
- Can be used in any commercial RO , 100 LPH to 2000 LPH system , Filteration system is easy to install , Engage any plumber , just ask to connect inlet outlet to your Tank pipe , Inlet outlet fittings can be purchased from any local harware store for mere Rs.40 per piece.
- Package contains :- 1 Sediment bag filteration assembly 1 inch In out , 1 Mounting Plate , wall screws, 4 mounting Screws , 1 pressure guage , 1 spanner
- Do connect the filteration system after your motor , and before storage tank , Advisable to install on roof just before the storage tank , In flats you can connect to the main line which comes inside the flat.
- This filter is suitable for connection to Monoblock / Raw water pumps upto 1 HP size , if you wish to connect to submersible / Other high pressure places , Search B09PJCSQW5 on amazon for high pressure bag filter
- The system does not remove TDS or Iron from Water , The filteration process removes suspended particles & sediment , TDS means total dissolved salts that can only be removed by Reverse osmosis process, TDS reduction is not measure of water quality for this filteration system
- This filteration system can remove Sediment from water , For Hardness filter , Search for B08JJ8CBP1 , For Scaling filter Search for B08TZVZL9X & If you have issues with Iron in water then search for B091PRHT6K on amazon.
- Compatible Hardware / Plumbing fittings are available on amazon , Please check your Pipe and and search for B0B3RKNKLC on amazon to buy Best quality Compatible Pipe fittings (please note that you need to first check the size of piping at your home (0.5 – 2 inch) and type of piping in your house (CPVC / UPVC / GI ) , Before you make selection for Pipe fittings through the given amazon product link.
- The supplied pressure guage acts as a indicator for filter getting choked , In most of the cases where customer has 0.5 or 1 Hp motor , pressure guage may remain to show 0 reading untill filter gets choked , This does not mean guage is bad , it means the water is flowing without any blockage in the filter , if you wish to check the pressure guage working , please close the Gate valve installed after the Filter and turn on motor , when the pressure will increase , guage will indicate the same.
